 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MOTOROLA SEMICONDUCTOR TECHNICAL DATA Order this document by MPSW63/D One Watt Darlington Transistors PNP Silicon COLLECTOR 3 MPSW63 MPSW64 * *Motorola Preferred Device BASE 2 EMITTER 1 MAXIMUM RATINGS Rating Collector - Emitter Voltage Collector - Base Voltage Emitter - Base Voltage Collector Current -- Continuous Total Device Dissipation @ TA = 25C Derate above 25C Total Device Dissipation @ TC = 25C Derate above 25C Operating and Storage Junction Temperature Range Symbol VCES VCBO VEBO IC PD PD TJ, Tstg MPSW63 MPSW64 -30 -30 -10 -500 1.0 8.0 2.5 20 - 55 to +150 Unit Vdc Vdc Vdc mAdc Watt mW/C Watts mW/C C 1 2 3 CASE 29-05, STYLE 1 TO-92 (TO-226AE) THERMAL CHARACTERISTICS Characteristic Thermal Resistance, Junction to Ambient Thermal Resistance, Junction to Case Symbol RqJA RqJC Max 125 50 Unit C/W C/W ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) Characteristic Symbol Min Max Unit OFF CHARACTERISTICS Collector - Emitter Breakdown Voltage (IC = -100 Adc, VBE = 0) Collector Cutoff Current (VCB = -30 Vdc, IE = 0) Emitter Cutoff Current (VEB = -10 Vdc, IC = 0) V(BR)CES ICBO IEBO -30 -- -- -- -100 -100 Vdc nAdc nAdc Preferred devices are Motorola recommended choices for future use and best overall value. Motorola Small-Signal Transistors, FETs and Diodes Device Data (c) Motorola, Inc. 1996 1 MPSW63 MPSW64 ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) (Continued) Characteristic Symbol Min Max Unit ON CHARACTERISTICS(1) DC Current Gain (IC = -10 mAdc, VCE = -5.0 Vdc) hFE MPSW63 MPSW64 MPSW63 MPSW64 VCE(sat) VBE(on) 5,000 10,000 10,000 20,000 -- -- -- -- -- -- -1.5 -2.0 Vdc Vdc -- (IC = -100 mAdc, VCE = -5.0 Vdc) Collector-Emitter Saturation Voltage (IC = -100 mAdc, IB = -0.1 mAdc) Base-Emitter On Voltage (IC = -100 mAdc, VCE = -5.0 Vdc) SMALL-SIGNAL CHARACTERISTICS Current-Gain -- Bandwidth Product(2) (IC = -10 mAdc, VCE = -5.0 Vdc, f = 100 MHz) 1. Pulse Test: Pulse Width 2. fT = |hfe| * ftest. fT 125 -- MHz v 300 ms, Duty Cycle v 2.0%. TYPICAL ELECTRICAL CHARACTERISTICS 200 h FE, DC CURRENT GAIN (X1.0 k) TJ = 125C 100 70 50 30 20 10 7.0 5.0 3.0 2.0 -0.3 25C VCE = -2.0 V -5.0 V -55C -10 V -0.5 -0.7 -1.0 -2.0 -3.0 -5.0 -7.0 -10 -20 -30 -50 -70 -100 -200 -300 IC, COLLECTOR CURRENT (mA) Figure 1. DC Current Gain VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS) -2.0 TJ = 25C -1.6 V, VOLTAGE (VOLTS) VBE(sat) @ IC/IB = 100 VBE(on) @ VCE = -5.0 V VCE(sat) @ IC/IB = 1000 IC/IB = 100 -0.4 0 -0.3 -0.5 -1.0 -2.0 TJ = 25C -1.8 -1.6 -50 mA -100 mA -175 mA -1.4 -1.2 -1.0 -0.8 -0.6 -0.1 -0.3 -300 mA -1.2 -0.8 IC = -10 mA -1.0 -3.0 -10 -30 -100 -300 -1 k -3 k -10 k -3.0 -5.0 -10 -30 -50 -100 -300 IC, COLLECTOR CURRENT (mA) IB, BASE CURRENT (mA) Figure 2. "ON" Voltage Figure 3. Collector Saturation Region 2 Motorola Small-Signal Transistors, FETs and Diodes Device Data MPSW63 MPSW64 R qV , TEMPERATURE COEFFICIENT (mV/ C) +5.0 +4.0 +3.0 +2.0 +1.0 0 -1.0 -2.0 -3.0 -4.0 RqVB FOR VBE -2.0 -5.0 -10 -20 *RqVC FOR VCE(sat) -50C TO +25C +25C TO +125C -50 -100 -300 +25C TO +125C -50C TO +25C *APPLIES FOR IC/IB hFE/100 f T , CURRENT-GAIN - BANDWIDTH PRODUCT (MHz) 600 400 300 200 TJ = 25C VCE = -20 V 100 60 40 30 20 -0.3 -0.5 -1.0 -2.0 -5.0 -10 -20 -50 -100 -300 -10 V -5.0 V -5.0 -0.3 -0.5 -1.0 IC, COLLECTOR CURRENT (mA) IC, COLLECTOR CURRENT (mA) Figure 4. Temperature Coefficients Figure 5. Current-Gain -- Bandwidth Product 20 15 C, CAPACITANCE (pF) 10 7.0 5.0 Cobo IC , COLLECTOR CURRENT (mA) -2 k Cibo -1 k CURRENT LIMIT THERMAL LIMIT SECOND BREAKDOWN LIMIT 1.0 mS 100 ms -500 1.0 s TA = 25C -200 DUTY CYCLE 10% -100 -1.5 -2.0 TC = 25C TJ = 25C f = 1.0 MHz 3.0 2.0 -0.1 -0.2 -0.5 -1.0 -2.0 -5.0 -10 -20 -30 -5.0 -10 -20 -30 VR, REVERSE VOLTAGE (VOLTS) VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS) Figure 6. Capacitance Figure 7. Active Region, Safe Operating Area Motorola Small-Signal Transistors, FETs and Diodes Device Data 3 MPSW63 MPSW64 PACKAGE DIMENSIONS A R P F L B SEATING PLANE NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. DIMENSION F APPLIES BETWEEN P AND L. DIMENSIONS D AND J APPLY BETWEEN L AND K MIMIMUM. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. INCHES MIN MAX 0.175 0.205 0.290 0.310 0.125 0.165 0.018 0.022 0.016 0.019 0.045 0.055 0.095 0.105 0.018 0.024 0.500 --- 0.250 --- 0.080 0.105 --- 0.100 0.135 --- 0.135 --- MILLIMETERS MIN MAX 4.44 5.21 7.37 7.87 3.18 4.19 0.46 0.56 0.41 0.48 1.15 1.39 2.42 2.66 0.46 0.61 12.70 --- 6.35 --- 2.04 2.66 --- 2.54 3.43 --- 3.43 --- K DIM A B C D F G H J K L N P R V XX G H V 123 D J SECTION X-X NC N CASE 029-05 (TO-226AE) ISSUE AD STYLE 1: PIN 1. EMITTER 2. BASE 3. COLLECTOR Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1-800-441-2447 or 602-303-5454 MFAX: RMFAX0@email.sps.mot.com - TOUCHTONE 602-244-6609 INTERNET: http://Design-NET.com JAPAN: Nippon Motorola Ltd.; Tatsumi-SPD-JLDC, 6F Seibu-Butsuryu-Center, 3-14-2 Tatsumi Koto-Ku, Tokyo 135, Japan. 03-81-3521-8315 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 4 MPSW63/D Motorola Small-Signal Transistors, FETs and Diodes Device Data *MPSW63/D* |
Price & Availability of MPSW64
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |